NOTE: Rocket Rewards applies to this item. You will save an additional 5%!
The PH10-R is a wireless equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and tethered cabs can be used simultaneously. The PH-10 has all the same features as our Power Pro 5 Amp system described previously, but with a whopping 10 Amps of power for O-Scale and Large Scale (G) layouts.
Requires a 18V, 10–12-amp power supply such as the Brutus (part number 5240241).
Contents of the PH10R System:
Powerhouse System Box (CS02) with 4 pin Power/Program Track Plug,18v 1amp DC Power Supply for CS02,Powerhouse 10-amp Booster box (PB110a) with 4 pin Power plug and 4 pin track plug,Pro Cab Throttle,Coiled cable for cab - 6 wire RJ12 cab bus cable,Seven-foot flat cable for cab - 6 wire RJ12 cab bus cable,Twelve-inch flat cable - 4 wire RJ-H control bus cable,UTP cab bus panel,D408 4-amp Locomotive Decoder.
Don't forget to use a REAL surge protector not a power strip!
Highly recommended is a DCC track output Circuit Breaker like the EB1 v1.1.
Link to NCE Manuals.
View CartItems0
